Specification

KHR3078 excavator key switch also named rotary ignition switch or excavator starter switch, with 2 keys supplied with switch. It compatible excavator brands as Sumitomo excavator Case excavator and Linkbelt excvator under models CX130 C CX130D CX135 CX145C CX160C CX160D CX210C CX210D CX225SR CX235C CX240B CX250C CX250D CX290B CX300C CX300D CX330 CX350B CX350C CX350D CX460 CX470B CX470C CX490D CX500D CX700B CX750D CX75C CX75SR CX80C, CX800B

Usage & Installation Notes

1. Safety First. Park the machine on level ground, lower the attachment, stop the engine, and disconnect the battery (negative terminal first) before beginning any electrical work.

2. Access & Removal. Remove the dash or console panel retaining the old switch. Disconnect the rear electrical connector (release the positive-lock tab; do not pull on the wires). Unscrew the retaining bezel or nut, and withdraw the old switch from the panel.

3. Transfer & Install. If the original switch has a separate key-reminder or illumination connector, transfer it to the new switch if applicable. Insert the new KHR3078 through the panel opening, align the key way, and secure the bezel/nut. Do not over-tighten, as this can crack the housing or distort the contact mechanism.

4. Connect & Verify. Reconnect the rear harness connector until a positive click is felt. Reconnect the battery. Test the switch positions:

  · OFF — all electrical power should be cut (except memory/clock circuits if applicable).

  · ON — instrument panel and accessory circuits should power up.

  · START — the starter should crank; the switch should spring-return from START to ON when released.

  · Verify that the key can be inserted and removed smoothly in the OFF position, and that it does not bind in the ON or START positions.

5. Key Note. The kit includes two keys. Record the key code or retain the tag supplied with the keys, as replacement keys require the code for duplication.

Package and Delivery

KHR3078 excavator key switch is packed in carefully to arrive in perfect condition.

1. Inner Protection: Each harness is individually wrapped in protective film or oil paper to prevent scratches and moisture damage.
2. Secondary Packaging: The wrapped unit is placed into original carton box with ample foam padding to absorb shock and vibration.
3. Outer Packaging: The small carton is then packed into a standard export carton
4. Goods will be delivered via DHL UPS FEDEX EMS etc. 

Customer Overviews

XCM-PARTS company work at excavator after-sales market over 20 years, customer satisfaction is the foundation of our business. Our excavator parts in high quality with warranty. We have bulk genuine Case excavator parts, Sumitomo excavator parts and Linkbelt excavator parts. We are dedicated to delivering high-quality products, professional support, and timely service that meet and exceed customer expectations. We actively listen to customer feedback, respond quickly to their needs, and continuously improve our products and processes. By building trust and creating lasting value, we strive to establish long-term partnerships with every customer. 

FAQ

Does it the highest quality?

Yes, It is genuine and new excavator switch.

What brand of Excavator fit to?

It fit to Case Sumitomo and Link-belt excavator.

How can I order it?

I will send invoice with payment information via email.

How do payment?

We accept to T/T, PayPal, Credit Card, Western Union transfer.

What's the delivery time?

Stock products estimated 3-7 days.

Do you have photo for the products?

Yes, we will send you photo before shipping.

Can you offer warranty for your products?

Yes, we offer 1-3 months warranty.

Does the ignition switch with key?

Yes, it switch and key set.